Find moisture. Thanks to RFID.

The HUM-ID system consists of two components: The humidity detector – (the sensor) and a handheld device (the scanner).  Both units can communicate through different layers and loads. The solution is based on the RFID technology.

Find moisture. Thanks to RFID.

The HUM-ID system consists of two components: The humidity detector – (the sensor) and a handheld device (the scanner).  Both units can communicate through different layers and loads. The solution is based on the RFID technology.

Small sensors – big effects.

RFID-Chips are well-known worldwide in different use cases for relieable identification and localization purposes. The cable- and batteryfree HUM-ID systems uses this standard as well. But the special sensors of HUM-ID can also transmit one crucial information: The wetness around them. With the handheld device each sensor can be checked individually without having to open the layers and loads. This is the reason why HUM-ID is rated as the most effective and affordable proof for impermeability for building companies and processors.

Zu den Produkten
Warmdach
Kaltdach
Gründach (extensiv)
Flachdach mit Photovoltaik
Nasszellen
Fussbodenheizungen
Balkons / Terrassen
Küchenabdichtungen

Various use cases. One reason.

HUM-ID became rapidly the standard for flat roofs in Germany. High performance, extreme flexibility and the low costs made the control of building elements for the first time easy and affordable. Since moisture and stagnant water is a big problem not only for flat roofs but for terraces, soil lines, plumbing units and underfloor heatings, the sensor-based system is used today in various scenarios.

Get in touch

The flat roof
under control

A frequent control of the flat roof is inevitable. The biggest problem: Moisture and stagnant water within the roof stay to often undetected. The easy to integrate HUM-ID sensors enables you to take a look through the roof. They are able to make the controll fully transparent and let you see danger spots beforehand.

The flat roof
under control.

A frequent control of the flat roof is inevitable. The biggest problem: Moisture and stagnant water within the roof stay to often undetected. The easy to integrate HUM-ID sensors enables you to take a look through the roof. They are able to make the controll fully transparent and let you see danger spots beforehand.

Ventilated Roofs

100%

Non-ventilated Roofs

100%

Green Roofs

100%

Roofs with Photovoltaic Systems

100%

Roof Decks

100%

Made for (almost) every kind of roof

Thanks to the strong signal and the high reading power the Hum-ID sensors, as passive receivers and the Roof-scanner as the active sender, can communicate through almost any material, such as covering layers of grit, synthetic materials and bitumen sheetings.

Send request

The digital proof.

With Hum-ID it is possible to detect permeated water already during the construction phase. The log function allows for the evidence that the roof is leak-proof at the time of measurement. Since HUM-ID is extremely easy to use the digital roof inspection does not require any special training or payed instruction.